Leeson Micro Series Compact Inverters Manual de usuario descargar pdf (Pagina 46)

16.0 PROGRAMMING THE MICRO SERIES DRIVE

16.1 PROGRAMMING THE PARAMETERS

 The MICRO Series keypad serves two purposes: operating the drive when in the LOCAL mode, and

programmingtheparametersforparticularapplications.Thekeypadisshownbelow,alongwiththedisplay

that should appear when the drive is first powered up:

To program the drive, the PROGRAM mode must be entered by pressing the PROG/RUN button. If

the password protection is disabled, pressing the PROG/RUN button will result in direct entry into the

PROGRAM mode. If the password protection is enabled, the PASSWORD prompt will appear when an

attempt is made to enter the PROGRAM mode. The PASSWORD prompt appears as follows:

 Toenterthepassword.usetheUPandDOWNarrowkeystoscrolltothepasswordvalue,andthenpress

theENTERkey.

NOTE: The factory default password is 0019.

STOP

20.00 HZ

PROG

RUN

AUTO

MAN

START

STOP

ENTER

FWD

REV

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 91 92

Sin comentarios

Leeson Micro Series Compact Inverters Manual de usuario Pagina 46