Leeson Micro Series Compact Inverters Manual de usuario descargar pdf (Pagina 34)

13.2.3 MICRO SERIES DISPLAY IN FAULT MODE

When the drive trips on a fault, the display will automatically change to the FAULT display, which indicates

the FAULT MESSAGE:

 InFAULTmode,theENTERkeywilltogglethedisplaybetweenfourscreens:FAULT,SPEED,%LOAD

andVAC.TheDRIVESTATUSforthesedisplayswillbeFAULT.Anexampleisshownbelowofthedrive

in the FAULT mode displaying SPEED.

NOTE:ToclearaFAULT,presstheSTOPkey,issuearemoveSTOPcommandatTB-1,oruseTB-13D

(refertoParameter50-TB13D).

13.2.4 MICRO SERIES DISPLAY IN AUXILIARY MODE

 IftheENTERkeyishelddown,thedisplaywillchangetotheauxiliarystatusscreen,whichindicatesthe

controlsource(LOCAL,REMOTE, or SERIAL), AUTOorMANUAL mode, and the speedreference

source.WhentheENTERkeyisreleased,thedisplaywillreturntothepreviousscreen.Anexampleofthe

auxiliarystatusscreenisshownbelow:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

Sin comentarios

Leeson Micro Series Compact Inverters Manual de usuario Pagina 34