Leeson FHP Series Chassis Mount Variable Speed Drives Manual de usuario descargar pdf (Pagina 11)

Specifications

1-Phase 1 or 3-Phase Max Continuous AC

Input Output Max Output Amps

Drive (VAC) (VAC) HP Current (AC) In

175318 230 230 ¼ 1.2 3

175319 *115 / 230 230 ¼ 1.2 7 / 3

175320 115 115 ¼ 2.4 7

175321 230 230 ½ 2.4 7

175310 *115 / 230 230 ½ 2.4 10 / 7

175322 115 115 ½ 4.0

†

175323 230 230 1 4.0

†

175311 *115 / 230 230 1 4.0

†

15 / 10

* Connect only 115 VAC line input to the 115 VAC terminals. Application of 230 VAC line input when set for 115

VAC will result in severe damage to the motor and drive, and possible explosion and injury.

† Derate current by 2% per degree if the operating temperature is above 40°C. Under no circumstances may the

ambient temperature exceed 55° C.

AC Voltage Input Range

175320 & 175322 115 VAC ± 10%, 50/60 Hz single phase

175318, 175321, & 175323 230 VAC ± 10%, 50/60 Hz single phase

175319, 175310, & 175311 115/230 VAC ± 10%, 50/60 Hz single phase

Standard Carrier Frequency 16 KHz

Output Frequency Range 0 – 120 Hz

Adjustable Maximum Output Frequency Range 30 – 120 Hz

Acceleration Time Range 1 – 12 seconds

Deceleration Time Range 1 – 12 seconds

Analog Input Voltage Range (signal must be isolated; S1 [-] to S2 [+]) 0 – 5VDC**

Input Impedance, S1 to S2 ~ 100K ohms

Vibration 0.5G max (20 – 50 Hz)

0.1G max (> 50 Hz)

Weight 1.2 lb

Ambient Operating Temperature Range 10° – 40° C

** An isolation board option that allows for a non-isolated 0 - 5 VDC, 0 - 10 VDC, or 4 - 20 mA input signal is

available (-PCM option). The option board is installed directly above the main board, maintaining the same

footprint and dimensions. Call the factory for more information regarding the -PCM option.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Sin comentarios

Leeson FHP Series Chassis Mount Variable Speed Drives Manual de usuario Pagina 11